ADPA1107-EVALZ

Analog Devices
584-ADPA1107-EVALZ
ADPA1107-EVALZ

Mfr.:

Paglalarawan:
RF Development Tools ADPA1107 Eval Board

Availability

Stock:
Hindi Naka-stock
Lead-Time ng Pabrika:
10 (na) Linggo Tinatayang oras ng paggawa sa pabrika.
Minimum: 1   Mga Multiple: 1
Presyo ng Unit:
₱-.--
Ext. Presyo:
₱-.--
Est. Taripa:
LIBRENG Ipapadala ang Produktong Ito

Presyo (PHP)

Dami Presyo ng Unit
Ext. Presyo
₱84,238.04 ₱84,238.04

Katangian ng Produkto Value ng Attribute Pumili ng Attribute
Analog Devices Inc.
Kategorya ng Produkto: Mga RF na Tool sa Pag-develop
RoHS:  
Evaluation Boards
RF Amplifier
ADPA1107ACPZN
4.8 GHz to 6 GHz
Brand: Analog Devices
Para Magamit sa: GaN Power Amplifier
Supply Voltage ng Pagpapatakbo: 28 V
Packaging: Bulk
Uri ng Produkto: RF Development Tools
Dami ng Pack ng Pabrika: 1
Subcategory: Development Tools
Nahanap na mga produkto:
Para maipakita ang mga katulad na produkto, pumili ng kahit na isang checkbox man lang
Pumili ng kahit isang checkbox sa itaas para magpakita ng katulad na produkto sa kategoryang ito.
Mga Piniling Attribute: 0

CAHTS:
8543900000
USHTS:
8543906800
JPHTS:
854390000
TARIC:
8543900000
MXHTS:
8543900100
ECCN:
EAR99

ADPA1107-EVALZ Amplifier Evaluation Board

Ang Analog Devices Inc. ADPA1107-EVALZ Amplifier Evaluation Board ay binubuo ng 2-layer printed circuit board (PCB) na gawa mula sa kapal na 10mil, Rogers 4350B copper-clad na naka-mount sa aluminum heat spreader. Ang heat spreader ay tumutulong sa paglalaan ng thermal relief sa device at ng mechanical support sa PCB. Dahil sa mga mounting hole sa heat spreader, naikakabit ang spreader sa isang heat sink. Ang spreader ay puwede ring i-clamp sa hot at cold plate. Ang mga RFIN at RFOUT port sa ADPA1107-EVALZ ay may 2.92mm (K) na mga female coaxial connector, at ang mga kaukulang RF trace ay may 50Ω na characteristic impedance. Ang ADPA1107-EVALZ ay may mga component na angkop gamitin sa buong operating temperature range ng device. Isang thorough calibration path ang inilaan sa pagitan ng J6 at J5 connector para mag-calibrate ng mga board trace loss. Ang J6 at J5 ay dapat na may 2.92mm (K) female coaxial connector para magamit ang mga ito sa pamamagitan ng calibration path.