TPIC2040DBTRG4

Texas Instruments
595-TPIC2040DBTRG4
TPIC2040DBTRG4

Mfr.:

Paglalarawan:
Motor / Motion / Ignition Controllers & Drivers Serial interface con trolled 7-ch motor

ECAD Model:
I-download ang libreng Library Loader para i-convert ang file na ito para sa iyong ECAD Tool. Matuto nang higit pa tungkol sa ECAD Model.

Availability

Stock:
Hindi Naka-stock
Lead-Time ng Pabrika:
6 (na) Linggo Tinatayang oras ng paggawa sa pabrika.
Minimum: 2000   Mga Multiple: 2000
Presyo ng Unit:
₱-.--
Ext. Presyo:
₱-.--
Est. Taripa:
LIBRENG Ipapadala ang Produktong Ito

Presyo (PHP)

Dami Presyo ng Unit
Ext. Presyo
Buo Reel (Mag-order sa multiple ng 2000)
₱97.44 ₱194,880.00

Katangian ng Produkto Value ng Attribute Pumili ng Attribute
Texas Instruments
Kategorya ng Produkto: Mga Controller at Driver ng Motor / Motion / Ignition
RoHS:  
Fan / Motor Controllers / Drivers
Motor Driver
700 mA
1 mA
- 20 C
+ 75 C
SMD/SMT
TSSOP-38
Reel
Brand: Texas Instruments
Bansa ng Pag-assemble: Not Available
Bansa ng Diffusion: Not Available
Bansang Pinagmulan: TW
Maselan sa Moisture: Yes
Dami ng Output: 7 Output
Frequency ng Pagpapatakbo: 33.8688 MHz
Output Voltage: 3.3 V, 9.7 V
Uri ng Produkto: Motor / Motion / Ignition Controllers & Drivers
Series: TPIC2040
Dami ng Pack ng Pabrika: 2000
Subcategory: PMIC - Power Management ICs
Supply Voltage - Max: 5 V
Timbang ng Unit: 191 mg
Nahanap na mga produkto:
Para maipakita ang mga katulad na produkto, pumili ng kahit na isang checkbox man lang
Pumili ng kahit isang checkbox sa itaas para magpakita ng katulad na produkto sa kategoryang ito.
Mga Piniling Attribute: 0

Kailangang i-enable ang JavaScript para gumana ito.

CNHTS:
8542399000
CAHTS:
8542390000
USHTS:
8542390090
MXHTS:
8542399901
ECCN:
EAR99

TPIC2040 7-Channel Motor Driver

Texas Instruments TPIC2040 7-Channel Motor Driver is a very-low noise type motor driver IC suitable for slim or ultra-slim DVD reader/writer. This IC includes integrated current sense resistance that measures SPM current and reduces drive system cost. The Texas Instruments TPIC2040 is controlled by serial I/F and is optimum for driving a spindle motor, sled motor, load motor, and Focus / Tracking / Tilt actuators. The spindle motor driver uses BEMF detection for sensorless startup and control of the spindle motor. As the output stage of all channels works in efficient PWM driving, it is possible to attain low-power operation by PWM control. Deadband less control is possible for a focus /tracking/tilt actuator driver. In addition, the spindle part output current limiting circuit, thermal shutdown circuit, sled-end detection circuit, actuator protection, and power-reset circuit are all built-in.