ICM-42605

TDK InvenSense
410-ICM-42605
ICM-42605

Mfr.:

Paglalarawan:
IMUs - Inertial Measurement Units 6-Axis MEMS Motion Tracking Device

ECAD Model:
I-download ang libreng Library Loader para i-convert ang file na ito para sa iyong ECAD Tool. Matuto nang higit pa tungkol sa ECAD Model.

Availability

Stock:
0

Mabibili mo pa rin ang produktong ito para sa backorder.

Inoorder:
9,783
Inaasahan 6/12/2026
10,000
Inaasahan 6/29/2026
Lead-Time ng Pabrika:
26
(na) Linggo Tinatayang oras ng paggawa sa pabrika para sa mga bilang na mas marami kaysa ipinakita.
Minimum: 1   Mga Multiple: 1
Presyo ng Unit:
₱-.--
Ext. Presyo:
₱-.--
Est. Taripa:
Packaging:
Buo Reel (Mag-order sa multiple ng 5000)

Presyo (PHP)

Dami Presyo ng Unit
Ext. Presyo
Cut Tape / MouseReel™
₱238.96 ₱238.96
₱212.86 ₱1,064.30
₱200.10 ₱2,001.00
₱184.44 ₱4,611.00
₱174.00 ₱8,700.00
₱152.54 ₱15,254.00
₱139.20 ₱69,600.00
₱136.30 ₱136,300.00
₱125.86 ₱314,650.00
Buo Reel (Mag-order sa multiple ng 5000)
₱125.86 ₱629,300.00
† ₱350.00 Idaragdag at kakalkulahin sa iyong shopping cart ang bayarin sa MouseReel™ Hindi makakansela at maisasauli ang mga order na MouseReel™

Katangian ng Produkto Value ng Attribute Pumili ng Attribute
TDK
Kategorya ng Produkto: Mga IMU - Mga Inertial Measurement Unit
RoHS:  
SMD/SMT
LGA-14
6-axis
I2C, SPI
Digital
2 g, 4 g, 8 g, 16 g
16 bit
2097.2 deg/s/LSB
- 40 C
+ 85 C
1.71 V
3.6 V
650 uA
Reel
Cut Tape
MouseReel
Brand: TDK InvenSense
Uri ng Produkto: IMUs - Inertial Measurement Units
Sensing Axis: X, Y, Z
Dami ng Pack ng Pabrika: 5000
Subcategory: Sensors
Pangalang pangkalakal: MotionTracking
Timbang ng Unit: 357.625 mg
Nahanap na mga produkto:
Para maipakita ang mga katulad na produkto, pumili ng kahit na isang checkbox man lang
Pumili ng kahit isang checkbox sa itaas para magpakita ng katulad na produkto sa kategoryang ito.
Mga Piniling Attribute: 0

CNHTS:
8542391090
USHTS:
9031808085
ECCN:
EAR99

ICM-42605 6-Axis MEMS Motion Sensor

TDK InvenSense ICM-42605 6-Axis MEMS Motion Sensor is a motion tracking device that combines a 3-axis gyroscope and a 3-axis accelerometer. The gyroscope supports eight programmable full-scale range settings from ±15.625dps to ±2000dps. The accelerometer supports eight programmable full-scale range settings from ±2g to ±16g. This motion sensor from TDK InvenSense also contains a 2K-byte FIFO that can lower the traffic on the serial bus interface and reduce power consumption. This is achieved by allowing the system processor to burst read sensor data and then go into a low-power mode.