Toradex Analog Camera Adapter (ACA) Interface Board
The Toradex Analog Camera Adapter (ACA) Interface Board is designed to connect analog cameras to the Colibri or Apalis Carrier boards easily using a Parallel Camera Interface (CIF). The ACA accepts NTSC/PAL/SECAM standard composite video signals and converts the signals into a YCrCb 4:2:2 video data stream. This video data stream is compatible with the 8-bit ITU-R BT.656 interface standard with external HSync/VSync signals. Up to four analog cameras can be connected; no external power supply is needed.
Features
- Uses Analog Devices ADV7280 video decoder
- 4x multiplexed video input channels, supporting NTSC/PAL/SECAM composite video signals
- No external power supply required
- Parallel data output format, 8-bit parallel ITU-R BT.656 with external HSync and VSync
- -10°C to +60°C operating temperature range
- 60mm x 50mm x 9.4mm in dimension
Hardware Architecture Block Diagram
Related Products
Toradex Computer on Modules / System on Modules
Reliable and cost-effective embedded platforms for building end products in extreme conditions.
Toradex Carrier Boards & Accessories
A complete section of evaluation and production-grade carrier boards, displays, and interfaces.
Toradex Colibri Arm® SODIMM-Sized System-on-Modules (SoMs)
Based on the NXP i.MX 8X, i.MX 6ULL, i.MX 7, and i.MX 6 SoCs.
Toradex Apalis Arm® System on Modules (SoMs)
Enables the development of advanced, robust products quickly with low risk and high performance.
Analog Devices Inc. ADV728x Video Decoders
Versatile one-chip, multiformat video decoders that detect standard analog baseband video signals.
Inilathala: 2024-01-04
| Na-update: 2024-01-11