STMicroelectronics B-STLINK-VOLT Voltage Adapter Board
STMicroelectronics B-STLINK-VOLT Voltage Adapter Board is an additional module for the STLINK-V3SET. It performs voltage adaptation for STM32 microcontroller targets running below 3.3V down to 1.65V. This module is enclosed in the original STLINK-V3SET casing when used as an STM32 debugging probe (JTAG / SWD / SWV / VCP) through the STDC14 connector. It can be inserted also between the STLINK-V3SET mainboard (MB1441) and its baseline adapter board (MB1440) when providing access to bridge signals and other connectors.
Features
- 1.65V to 3.3V voltage adapter board for STLINK-V3SET
- Input/output level shifters for STM32 debug SWD, SWV, and JTAG signals
- Input/output level shifters for VCP Virtual COM port (UART) signals
- Input/output level shifters for the bridge (SPI/UART/I2C/CAN/GPIOs) signals
- Closed casing when using the STDC14 connector (STM32 SWD, SWV, and VCP)
- Compatible with the STLINK-V3SET adapter board (MB1440) for STM32 microcontrollers JTAG and bridge
- 0°C to +50°C operating temperature range
Applications
- Programming and debugging low-voltage microcontrollers
- Embedded system development
- Prototyping and evaluation of low-voltage designs
- Education and research
- IoT and battery-powered device development
Related Products
STMicroelectronics STLINK-V3SET Debugger/Programmer Probe
A modular stand-alone probe that features an embed STM32 32-bit microcontroller.
COMPLETE YOUR DESIGN
STMicroelectronics Standard Products
A broad range of drop-in replacements for general-purpose analog ICs, discretes, and serial EEPROMs.
Inilathala: 2020-06-25
| Na-update: 2025-01-14