STMicroelectronics STEVAL-BFA001V2B Industrial Reference Design Kit
STMicroelectronics STEVAL-BFA001V2B Industrial Reference Design Kit is designed for condition monitoring (CM), and predictive maintenance (PdM). The layout is designed to meet IEC61000-4-2/4 and EN60947 requirements for industrial applications. The hardware development kit from STMicroelectronics consists of an industrial sensor board (STEVAL-IDP005V2) and a STLINK-V3MINI programming and debugging tool. It also includes an adapter (STEVAL-UKI001V2), a 0.050" 10-pin flat cable, a 4-pole cable-mount connector plug with male contacts, and an M12 female connector with a 2m cable that is used for power on and connection with a master port.
Features
- Kit contents
- Sensor node (marked STEVAL-IDP005V2; not available for separate sale)
- Communication adapter board (marked STEVAL-UKI001V2; not available for separate sale)
- STLINK-V3MINI programming and debugging interface
- Cables and connector
- 18V to 32V main supply voltage
- Main components of the sensor node
- 32-bit Arm® Cortex®-M4 core for signal processing and analysis (STM32F469AI)
- Ultra-wide bandwidth 3-axis digital accelerometer (IIS3DWB)
- Absolute digital pressure sensor (LPS22HB)
- Relative humidity and temperature sensors (HTS221)
- Digital microphone sensors (IMP34DT05)
- IO-Link PHY device (L6362A)
- EEPROM (M95M01-DF) for data storage
- Step-down switching regulator and LDO regulator (L6984 and LDK220)
- ESD protection (ESDALC6V1-1U2, SMBJ33CA)
- Complete set of firmware demos based on 3D accelerometer library with advanced frequency and time-domain signal processing for predictive maintenance, including
- Programmable FFT size (256, 512, 1024, 2048), overlapping and averaging
- Programmable windowing (Flat Top, Hanning, Hamming, Rectangular)
- Speed RMS moving average, acceleration max. peak
- Programmable threshold for warning and alarm conditions in the spectral band
- Microphone algorithms
- PDM to PCM
- Sound pressure level (SPL)
- Audio FFT
- IO-Link device stack v1.1 protocol and IO-Link Device Descriptor (IODD) for all measurements included (provided by TEConcept GmbH)
- M12 standard industrial connector
- SWD connector for debugging and programming capability
- Expansion connector with GPIO, ADC, I2C bus, timer
- Designed to meet IEC industrial standard requirements
Resources
Content Stream
Videos
Sensor Node Layout
On The Board
STMicroelectronics IIS3DWB 3-Axis Digital Vibration Sensors
A system-in-package solution featuring low noise, over an ultra-wide, and flat frequency range.
STMicroelectronics LPS22 MEMS Nano Pressure Sensor
Ultracompact piezoresistive absolute pressure sensor which functions as a digital output barometer.
STMicroelectronics IMP34DT05 Omnidirectional MEMS Microphone
Compact, low-power device built with a capacitive sensing element and an IC interface.
STMicroelectronics L6362A IO-Link Communication Transceiver Device IC
An IO-Link and SIO device supporting COM1 (4.8 kbaud), COM2 (38.4 kbaud) and COM3 (230.4 kbaud).
STMicroelectronics M95M01 1-Mbit SPI BUS EEPROM Devices
Organized as 131072x8 bits, accessed through the SPI bus.
STMicroelectronics L6984 Synchronous Step-Down Switching Regulators
Step-down monolithic switching regulator able to deliver up to 400mADC.
STMicroelectronics LDK220 Low Dropout (LDO) Voltage Regulators
200mA low quiescent current and low noise LDO.
COMPLETE YOUR DESIGN
STMicroelectronics Standard Products
A broad range of drop-in replacements for general-purpose analog ICs, discretes, and serial EEPROMs.